Mô tả sản phẩm
Gear Drive Heavy Duty
GLS series features
- Innovation profile design by JAGUAR team
- RPM low to 1500, high torque, 4 pole heave duty motor
- Super big size configuration air end
- Up to 20% noise reduced
- High efficient discharge
- Heavy duty bearing, gear and oil seal
- Long service life design
GLS series is suitable especially below end users:
- 24 hours non-stop air supply such as electricity power plant
- Tough environment such as textile, construction materials factory
- Stable pressure running such as chemical factory
- Long service life such as machinery industries
- Reliable and simple installation, operation and maintenance
JAGUAR+ Intelligent Control System
Display
- Discharge pressure
- Discharge Temp.
- Fan current
- Motor current / power Total Run / Load time
- Oil Filter using time
- Air Filter using time
- Air/Oil Separator using time
Alarm
- Over-heat
- Over-pressure
- Air Filter maintenance
- Oil Filter maintenance
- Air/Oil separator maintenance
- Air Filter blocked (optional) Oil Filter blocked (optional)
- Air / Oil separator blocked (optional)
Fault Stop Protection
- Main motor overload
- Fan motor overload
- Motor current high
- Pressure sensor wire break Temp. sensor wire break
- Wrong phase / phase lack
- Discharge pressure high
- Discharge Temp. high
User’s Parameter Setting
- Load pressure
- Unload pressure
- Delay start time
- Re-start time
- Unloading time
- Fan start Temp
Intelligent Control
- Compressor sleep after certain unloading time
- Remote control Start / Stop
- Multi-Compressors jointly control
- Remote communication control
- Alternate start /stop different compressor
Control Panel Display
- Local / Remote starting mode
- Timing Start / Stop in use
- Language Select: Eng / Chi
Technical Data Sheet ( VSD Drive Type Available on Request )
Model | Mpa | GLS60 | GLS75 | GLS100 | GLS125 | GLS150 | GLS175 | GLS200 | GLS275 | GLS350 | |
Max air displacement/ discharge pressure m3/min | 0.6 | 9.4 | 11.9 | 16.1 | 18.3 | 23 | 26.8 | 32.4 | 38.9 | 45.2 | |
0.7 | 8.8 | 11.1 | 14.9 | 16.8 | 20.8 | 25 | 30.1 | 37.3 | 43.4 | ||
0.8 | 8.2 | 10.4 | 14 | 16.1 | 19.2 | 24.2 | 28.7 | 34.1 | 41.5 | ||
Working Mode of Cooler | Air cooling/water cooling | ||||||||||
Discharge Temperature | ℃ | Air cooling﹤environmental temperature+10℃,water cooling﹤40℃ | |||||||||
Volume of lubricating oil | L | 25 | 25 | 60 | 60 | 70 | 94 | 94 | 94 | 185 | |
Noise | dB(A) | 73 | 73 | 75 | 75 | 77 | 77 | 79 | 79 | 80 | |
Motor | Power | kW/HP | 45/60 | 55/75 | 75/100 | 90/125 | 110/150 | 132/175 | 160/200 | 200/275 | 250/350 |
Rotation Rate | RPM | 1480 | |||||||||
Start mode | Y-△start | ||||||||||
Voltage | 220V/380V/415V 50Hz/60Hz | ||||||||||
Dimension | Length | mm | 1650 | 1800 | 1900 | 2000 | 2700 | 3000 | 3050 | 3050 | 3400 |
Width | mm | 1100 | 1250 | 1300 | 1350 | 1750 | 2000 | 2100 | 2100 | 2200 | |
Height | mm | 1400 | 1500 | 1680 | 1750 | 1950 | 2050 | 2190 | 2190 | 2200 | |
Caliber of Air-vent | inch | 1-1/2" | 2" | 2" | 2" | 2-1/2" | 3" | 4" | 4" | 4" | |
Caliber of cooling nozzle | inch | / | / | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | |
Discharge of cooling water | L/min | / | / | 200 | 200 | 200 | 300 | 300 | 400 | 400 |